5Press the Component Select button or the Label key of which preset settings you want to erase.
The component name is displayed on the left Label key.
7Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF pressed for less than 2 seconds
The Commander returns to the previously set mode.
6Press the YES key.
YES
During erasing, “c c ” stays lit. When erasing finishes, “OK” is displayed with a beep sound.
If you press the NO key
The display returns to Step 4.
If you want to erase the learned signals for other Component Select buttons or corresponding Label keys
Repeat Steps 5 - 6.
To clear all signals learned for all Component Select buttons or corresponding Label keys
1Follow Steps 1 - 3 on page 26.
2While pressing the DEL key, press the COMPO key.
COMPO
Continued 27