xSURROUND L xxx.x dB (Surround speaker (L) level)

Initial setting: 0 dB

You can adjust the level from –20 dB to +10 dB in 0.5 dB steps.

xSURROUND R xxx.x dB (Surround speaker (R) level)

Initial setting: 0 dB

You can adjust the level from –20 dB to +10 dB in 0.5 dB steps.

xSURR BACK xxx.x dB (Surround back speaker level)*

Initial setting: 0 dB

You can adjust the level from –20 dB to +10 dB in 0.5 dB steps.

xSURR BACK L xxx.x dB (Surround back (L) level)**

Initial setting: 0 dB

You can adjust the level from –20 dB to +10 dB in 0.5 dB steps.

xSURR BACK R xxx.x dB (Surround back (R) level)**

Initial setting: 0 dB

You can adjust the level from –20 dB to +10 dB in 0.5 dB steps.

xSUB WOOFER xxx.x dB

Initial setting: 0 dB

You can adjust the level from –20 dB to +10 dB in 0.5 dB steps.

xMULTI CH SW xxx dB (Multi channel sub woofer level)

Initial setting: 0 dB

Lets you increase the level of the MULTI CHANNEL INPUT sub woofer channel by +10 dB. This adjustment may be necessary when connecting a DVD player to the MULTI CHANNEL INPUT jacks. The sub woofer level from DVD players is 10 dB lower than that of Super Audio CD players.

*Only when the surround back speakers are set to “SINGLE” on the SPEAKER SET UP menu (page 49).

**Only when the surround back speakers are set to “DUAL” on the SPEAKER SET UP menu (page 49).

Note

When one of the following sound fields is selected, no sound is output from the sub woofer if all the speakers are set to “LARGE” on the SPEAKER SET UP menu. However, the sound will be output from the sub woofer if the digital input signal contains L.F.E. signals, or if the front or surround speakers are set to “SMALL.”

•D.CONCERT HALL A

•D.CONCERT HALL B

•CHURCH

•JAZZ CLUB

•LIVE CONCERT

•STADIUM

•SPORTS

Advanced LEVEL menu parameters

Use the CUSTOMIZE menu and set “MENU EXPAND” to “ON” to enable display and setup as follows. The initial setting is marked with an underscore.

xPHASE AUDIO (Phase audio)

• ON

Lets you output front 2 channel source sound (instead of the test tone) sequentially from adjacent speakers.

• OFF

Note

The HDMI sound is not output when you display the receiver’s menu on the TV monitor.

xPHASE NOISE (Phase noise)

• ON

Lets you output the test tone sequentially from adjacent speakers.

• OFF

100GB