x12V TRIG. 3RD (12 V trigger for the 3rd zone)
Lets you turn the external equipment on or off by outputting 12V triggers when the receiver is turned on or off. For example, you can automatically unroll your video screen when you turn on the receiver.
•OFF
Lets you turn off output of 12V triggers even when the main receiver is turned on.
•CTRL
Lets you turn the output of 12V triggers on or off manually using the CIS command of the IR remote or RS232C control.
•ZONE
Lets you turn on output of 12V triggers when the main receiver or the receiver in each zone is turned on.
•INPUT (for “12V TRIG. MAIN” only) Lets you turn on output of 12V triggers when the main receiver is turned on, depending on the setting of each input. See “To set the 12V trigger setting for each input.”
•MAIN (for “12V TRIG. 2ND” and “12V TRIG. 3RD” only)
Lets you link 2nd or 3rd zone trigger operation to the main receiver.
To set the 12V trigger setting for each inputThe initial setting of TAPE, MD/DAT,
1Select “INPUT” in “12V TRIG. MAIN.”
2Press MEMORY/ENTER.
3Turn MENU to select the input.
4Turn +/– to select “ON” to activate the 12V trigger or select “OFF” to deactivate it.
5Press MEMORY/ENTER.
Operation Amplifier
83GB