4 Move the easy scroll key to select the category (i.e., the component that is actually connected to the corresponding jacks; in this case, “VCR”), then press the key to enter the selection.

The maker list appears.

5 Move the easy scroll key to select the maker of the component (“Aiwa,” for example), then press the key to enter the selection.

When programming the remote to control a Sony component, select “Sony.” Programming is now completed.

Programming the TV operation buttons

1

2,3,

4,5

1 Press RM SET UP.

The set up list appears.

2 Move the easy scroll key to select “IR SET,” then press the key to enter the selection.

The IR SET list appears.

3 Move the easy scroll key to select “TV-KEY,” then press the key to enter the selection.

The category list appears.

4 Move the easy scroll key to select “TV,” then press the key to enter the selection.

The maker list appears.

5 Move the easy scroll key to select the maker of the component (“Aiwa,” for example), then press the key to enter the selection.

To cancel programming

Move the easy scroll key to select “Exit” or “Cancel” during any step, then press the key to enter the selection.

To use a programmed component

Press the programmed button to activate the input you want.

Tip

You can freely assign any component to USER1 and USER2 items in the IR SET list.

1 Perform steps 1 and 2 in “Programming the remote.”

2 Move the easy scroll key to select “USER1” or “USER2,” then press the key to enter the selection.

3 Continue from step 3 in “Programming the remote” to select the category and maker of the component.

Notes

If you select “IR SET” for a component that already has a learned button setting, the learned codes for that component are cleared. However, if the cleared learned button is used in a Macro Play setting, the setting for that button will be changed to “NO SET.”

You can set up one component using i.LINK.

Some buttons may stop working, depending on the operating component.

114GB