The following operations are described for connecting an IR repeater and operating the receiver in 2nd zone or 3rd zone. When an IR repeater is not connected, use this receiver in the main room.

1 On the remote, press 2ND ZONE or 3RD ZONE.

The remote switches to the 2nd zone or 3rd zone mode.

2 Turn on the main receiver (this receiver).

3 Turn on the amplifier in the 2nd or 3rd zone.

4 Press one of the input buttons

on the remote to select the source signals you want to output.

For the 2nd zone, analog video and audio signals are output. For the 3rd zone, only analog audio signals are output. When you select “SOURCE,” the signals of the current input are output. Refer to page 82 for details.

5 Adjust to a suitable volume.

In the case of illustration 1-1or 2 (page 84, 85), adjust the volume using the receiver of the 2nd/3rd zone.

In the case of illustration 1-2(page 85), you can only adjust the surround back speaker volume in 2ND ZONE.

1Set to “2ND ZONE” on the SURR BACK SP setting (page 49).

2Adjust the volume using MASTER VOL+/– on the remote.

The initial setting of the volume is dB (no sound output).

Example of controlling an amplifier in the 2nd room

To

Do the

 

following

 

 

Turn the power on or off

Press ?/1.

 

 

Listen to the sound of the

Press SA-CD/

CD player connected to the CD, then press

CD input jacks

H.

 

 

Adjust the volume

Press MASTER

 

VOL +/–.

 

 

Tips

Even when this receiver is turned off, the receiver in the 2nd zone or 3rd zone remains turned on. To turn off all receivers, press ?/1 and AV ?/1 on the RM-AAE003 remote at the same time (SYSTEM STANDBY).

Only signals from components connected to the analog input jacks are output through the 2ND ZONE OUT or 3RD ZONE OUT jacks. No signals are output from components connected to only the digital input jacks.

When “SOURCE” is selected, the signals input to the MULTI CH IN jacks are not output from the 2ND ZONE OUT or 3RD ZONE OUT jacks even when MULTI CH IN is selected. The analog audio signals of the current function are output.

To operate with RM-AAE003

1 Press RM SET UP.

The set up list appears.

2 Select “COMMAND MODE” by moving and pressing the easy scroll key.

3 Select “2ND ZONE” (or “3RD ZONE”) by moving and pressing the easy scroll key.

86GB