3 Press MEMORY/ENTER while “ENTER to Clear ALL” appears on the display.
After “MEMORY CLEARING...” appears on the display for a while, “MEMORY CLEARED!” appears.
The following items are reset to their factory settings.
•All settings in the SPEAKER SET UP,
LEVEL, SURR SET UP, EQUALIZER, CUSTOMIZE, TUNER and CIS menus.
•The sound field memorized for each input and preset station.
•All preset stations.
•All index names for inputs and preset.
6: Preparing the remote
Inserting batteries into the remoteInsert three LR6
Insert two R6
Observe the correct polarity when installing batteries.
Started Getting
Notes
•Do not leave the remote in an extremely hot or humid place.
•Do not use a new battery with old ones.
•Do not mix alkaline batteries and other kinds of batteries.
•Do not expose the remote sensor of the receiver to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.
•If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
Tip
Under normal conditions, the batteries should last for about 3 months. When the remote no longer operates the receiver, replace all the batteries with new ones.
45GB