3 Move the easy scroll key to select “FM/AM,” then select FM or AM by pressing the key.
Each time you press the easy scroll key, the band switches to FM or AM.
You can also use FM/AM on the receiver.
4 Move the easy scroll key to select “DIRECT TUNING” from the SUB menu, then press the key.
“0” flashes on the display window.
5 Press > on the remote repeatedly until the NUM menu appears, then select the numbers for the frequency, then press the key.
Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 b 0
(You do not have to enter the last “0” when the tuning scale is set to 100 kHz.) Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
(You do not have to enter the last “0” when the tuning scale is set to 10 kHz.) If you have tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.
If you cannot tune in a station and the entered numbers flash
Make sure you have entered the right frequency. If not, repeat step 4. If the entered numbers still flash, the frequency is not used in your area.
Storing FM stations automatically
(AUTOBETICAL)
(Models of area code CEL only) This function lets you store up to 30 FM and
FM RDS stations in alphabetical order without |
| |
redundancy. Additionally, it only stores the | Amplifier | |
stations with the clearest signals. | ||
| ||
If you want to store FM or AM stations one by |
| |
one, see “Presetting radio stations.” | Operation | |
1,2 | ||
|
MEMORY/ENTER
1 Press ?/1 to turn off the receiver.
continued
77GB