Selecting a component

Basic procedure for selecting a component

Do the procedure below to select a component from the input list.

1 Press INPUT SELECTOR.

The input list appears. The items in the list correspond with the jacks on the receiver.

2 Move the easy scroll key to select a component from the list, then press the key to enter the selection.

Information about the component appears in the display window.

Tips

•You can modify the category indication. The category indication tells you what component is actually connected to the jacks on the receiver. If a component is connected to jacks for which they are not originally meant, you can modify the category indication to match the component. For details, see “Programming the remote” on page 113.

•You can set the remote to automatically turn on a component when it is selected from the function list. For details, see “Using the auto power function” on page 119.

•You can customize the input list.

If you selected the tape deck

Move the easy scroll key to select deck A or B.

Note

When the remote is programmed to control a non- Sony tape deck, tape deck A and B may not switch.

108GB