Sony STR-DA7100ES 1,3, Switching the audio input mode, (INPUT MODE), To mute the sound

Notes

•The surround effect does not work when MULTI CH IN is selected (page 92).

•When you select an input other than “i.LINK” the receiver is set such that the power to the i.LINK circuits is off as the initial setting.

(“i.POWER” is set to “AUTO” in the CUSTOMIZE menu setting. Refer to page 68 for details.) When you select “i.LINK” as the input, the power of the i.LINK circuits turns on. “i.LINK Connecting” appears on the display, but sound may not yet be output. Make sure to operate the player only after the “i.LINK Connecting” indicator turns off.

2 Turn on the component and start playback.

3 Press MASTER VOL +/– to adjust the volume.

You can also use MASTER VOLUME on the receiver.

Switching the audio input mode(INPUT MODE)

You can select the audio input mode by setting the audio input mode when you connect components to both digital and analog audio input jacks on the receiver.

1

2

1,3

Operation Amplifier

To mute the sound

Press MUTING on the remote. To cancel, press MUTING on the remote again or turn MASTER VOLUME clockwise to raise the volume. Even if you turn off the receiver, the muting function works when you turn the receiver on again.

1 Press INPUT SELECTOR, then select a component by moving and pressing the easy scroll key.

You can also use INPUT SELECTOR on the receiver.

2 Press < repeatedly until the RECEIVER MENU appears.

3 Select “INPUT MODE” by moving and pressing easy scroll key.

The selected audio input mode appears on the display window on the receiver.

You can also use INPUT MODE on the receiver.

continued

59GB