Clearing all the contents of the remote’s memory

1

2,3,

4

1 Press RM SET UP.

The set up list appears.

2 Move the easy scroll key to select “ALL CLEAR,” then press the key to enter the selection.

The ALL CLEAR list appears.

3 Move the easy scroll key to select “Yes,” then press the key to enter the selection.

“CLEAR OK?!” appears.

4 Move the easy scroll key to select “Yes” again, then press the key.

All the contents of the remote’s memory (i.e., all the programmed data) are cleared.

Other operations

Customizing the input list

You can set the remote to display only the inputs you use in the input list.

1

2,3

1 Press RM SET UP.

The set up list appears.

2 Move the easy scroll key to select “INPUT LIST,” then press the key to enter the selection.

The INPUT LIST list appears.

A “*” in front of the input name means that the input is displayed in the input list.

3 Move the easy scroll key to select an input that will not be displayed in the input list, then press the key to enter the selection.

“*” disappears for the selected input.

To display the input in the input list

In step 3, press the key repeatedly until “*” appears again.

118GB