Sony STR-DA7100ES Changing button assignments (RM- US106A only)

2 Move the easy scroll key to select “CONTRAST,” then press the key to enter the selection.

3 Move the easy scroll key to select “+” or “–,” then press the key to enter the selection.

Each time you press the key, the contrast of the display changes. To exit adjusting, move the easy scroll key to select “Exit,” then press the key to enter the selection.

Changing button assignments (RM- US106A only)

You can change the factory settings of the input buttons to suit the components in your system. For example, if you connect an LD player to the VIDEO 2 jacks on the receiver, you can set the VIDEO 2 button on this remote to control the LD player.

Note, however, that the settings of the TUNER button cannot be changed.

1

2,3

4

1 Press RM SET UP for more than

2 seconds.

The indicator lights up.

2 Press the input button of which you want to change the assignment.

The indicator turns off once and turns on again when a valid button is pressed. Only the first input button that is pressed will be registered.

Example: Press VIDEO 2.

120GB