Notes on playing a Super Audio CD disc on a Super Audio CD player

•No sound is output when playing a Super Audio CD disc on a Super Audio CD player connected to only the SA-CD/CD OPTICAL or SA-CD/CD COAXIAL IN jack on this receiver. When you play a Super Audio CD disc, connect the player to the MULTI CHANNEL INPUT or SA-CD/CD IN jack. Refer to the operating instructions supplied with the Super Audio CD player.

•You cannot make digital recordings of a Super Audio CD disc. Use the analog jack for recording in this case.

•When connecting optical digital cords, insert the plugs straight in until they click into place.

•Do not bend or tie optical digital cords.

If you want to connect several digital components, but cannot find an unused input

See “Listening to digital sound from other inputs (DIGITAL ASSIGN)” (page 61).

Tips

•All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies.

•You can also connect an LD player with a DOLBY DIGITAL RF OUT jack via an RF demodulator (You cannot connect an LD player’s DOLBY DIGITAL RF OUT jack directly to this unit’s digital input jacks). Refer to the operating instructions supplied with the RF demodulator.

Started Getting

27GB