Performing several commands in sequence automatically

(Macro Play)

The Macro Play function lets you link several IR codes in a sequential order as a single command.

For example, after putting on a light of the room and turning on an air-conditioner then, the receiver plays a number of CDs in a series. The remote provides 2 macro lists (MACRO1 and MACRO2). You can specify up to 16 IR codes for each macro list.

Program the sequence of the operation

1

2,3,

4,5,

6,7

1 Press RM SET UP.

The set up list appears.

2 Move the easy scroll key to select “IR SET,” then press the key to enter the selection.

The IR SET list appears.

3 Move the easy scroll key to select “MACRO1” (or “MACRO2”), then press the key to enter the selection.

The program number list appears.

4 Move the easy scroll key to select the macro step number (“1-NO SET,” for example) then press the key to enter the selection.

The category list appears.

5 Move the easy scroll key to select the component category (“VCR,” for example), then press the key to enter the selection.

The maker list appears.

6 Move the easy scroll key to select the maker, then press the key to enter the selection.

The function list appears.

7 Move the easy scroll key to select the IR code for the operation you want to perform, then press the key to enter the selection.

The program number list reappears.

8 Repeat steps 4 through 7 to program up to 16 IR codes.

When you have finished programming IR codes, select “Exit” in step 7.

To cancel programming

Move the easy scroll key to select “Exit” or “Cancel” during any step, then press the key to enter the selection.

Starting macro play

1Press INPUT SELECTOR.

The input list appears.

2Move the easy scroll key to select “MACRO1” or “MACRO2,” then press the key to enter the selection.

The IR codes appear on the display window as they are performed.

continued

Remote the Using

115GB