xCENTER BASS xxx dB (Center speaker bass level)

Initial setting: 0 dB

You can adjust the level from –10 dB to +10 dB in 1 dB steps.

xCENTER MID xxx dB (Center speaker midrange level)

Initial setting: 0 dB

You can adjust the level from –10 dB to +10 dB in 1 dB steps.

xCENTER MID xxx Hz (Center speaker midrange frequency)

Initial setting: 1 kHz

You can adjust the frequency from 100 Hz to 10 kHz in 5 steps.

xCENTER TREBLE xxx dB (Center speaker treble level)

Initial setting: 0 dB

You can adjust the level from –10 dB to +10 dB in 1 dB steps.

xSURR/SB BASS xxx dB (Surround/surround back speaker bass level)

Initial setting: 0 dB

You can adjust the level from –10 dB to +10 dB in 1 dB steps.

xSURR/SB TRE. xxx dB (Surround/surround back speaker treble level)

Initial setting: 0 dB

You can adjust the level from –10 dB to +10 dB in 1 dB steps.

xPRESET x CLEAR (Equalizer bank clear)

You can reset the adjusted equalizer settings to the initial setting. For details, see “Clearing stored equalizer settings.”

Tip

You can adjust the front speaker bass and treble level with BASS control and TREBLE control on the receiver.

To apply the stored equalizer

1Perform step1 to 3 in “Adjusting the equalizer” on page 104.

2Move the control key B/b to select (EQ PRESET [1]-[5]).

You can also use +/– on the receiver.

To turn off the equalizer

Select “EQ BANK [OFF]” in step 4 in “Adjusting the equalizer” on page 104.

Clearing stored equalizer settings

1Perform step1 to 3 in “Adjusting the equalizer” on page 104.

2Move the control key B/b to select the equalizer (EQ PRESET [1]-[5]) you want to clear.

You can also use +/– on the receiver.

3Move the control key V/v to select “PRESET x CLEAR.”

You can also use MENU on the receiver. “x” is the number of the selected equalizer bank.

4Move the control key B/b to select “YES,” then press the key.

You can also use +/– and MEMORY/ ENTER on the receiver.

“Are you sure?” appears on the display.

5Move the control key B/b to select “YES,” then press the key.

You can also use +/– and MEMORY/ ENTER on the receiver.

“PRESET x CLEARED!” appears on the display and the adjusted contents of the selected equalizer bank are cleared.

Up Set Speakers Advanced

105GB