Sony STR-DA7100ES To cancel, To clear all remote button assignments, Valid buttons and the corresponding categories

3 Referring to the table below, press the input button for the category you want.

The indicator turns off when a valid button is pressed.

Example: Press DVD twice.

4 Press SOURCE.

The new assignment is registered.

The indicator slowly lights up twice, then goes off.

To cancel

Press RM SET UP during any step.

Tip

If the operation is unsuccessful, the indicator flashes four times and the remote automatically exits the button assignment mode. In this case, the new assignment is not registered and the previous setting remains.

Notes

•If you do not press a button during step 2 through 4 within 60 seconds, the remote automatically exits the button assignment mode. Start again from step 1.

•In step 3, if you press the same button more than the possible number of categories that can be selected, only the last category is registered for the new assignment.

Valid buttons and the corresponding categories

Corresponding	Press
categories
VTR-1	VIDEO 1 once
VTR-2	VIDEO 2 once
VTR-3	VIDEO 3 once
VTR-4	VIDEO 1 twice
VTR-5	VIDEO 2 twice
VTR-6	VIDEO 3 twice
DVD player	DVD once
LD player	DVD twice
TV	TV/SAT once

Corresponding	Press
categories
SAT	TV/SAT twice
Tape deck-A	TAPE once
Tape deck-B	TAPE twice
MD deck	MD/DAT once
DAT deck	MD/DAT twice
CD player-1	SA-CD/CD once
CD player-2	SA-CD/CD twice
CD player-3	SA-CD/CD three times
VIDEO CD player	VIDEO 1, then SA-CD/
	CD

To clear all remote button assignments

Hold down RM SET UP, then press ?/1.

The remote is reset to its factory-settings.

Remote the Using

121GB