xSPEAKER PATTERN (Speaker setup pattern)

When “SP EASY SET UP” is set to “YES,” select the speaker setup pattern by moving and pressing the control key (You can also use +/– and MEMORY/ENTER on the receiver). Check your speaker pattern using the supplied “Quick Setup Guide.”

xSUB WOOFER (Sub woofer)

YES

If you have connected a sub woofer, select “YES.”

• NO

If you have not connected a sub woofer, select “NO.” This activates the bass redirection circuitry and outputs the L.F.E. signals from other speakers.

Tip

In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend setting the sub woofer’s cut off frequency as high as possible.

xFRONT SP (Front speakers)

LARGE

If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE.” Normally, select “LARGE.” When the sub woofer is set to “NO,” front speakers are automatically set to “LARGE.”

• SMALL

If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer. When the front speakers are set to “SMALL,” the center, surround, and surround back speakers are also automatically set to “SMALL” (unless previously set to “NO”).

xCENTER SP (Center speaker)

LARGE

If you connect a large speaker that will effectively reproduce bass frequencies, select “LARGE.” Normally, select

“LARGE.” However, if the front speakers are set to “SMALL,” you cannot set the center speaker to “LARGE.”

SMALL

If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the center channel bass frequencies from the front speakers (if set to “LARGE”) or sub woofer.

NO

If you have not connected a center speaker, select “NO,” the sound of the center channel will be output from the front speakers.

xSURROUND SP (Surround speaker)

The surround back speakers are all set to the same setting.

LARGE

If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE.” Normally, select “LARGE.” However, if the front speakers are set to “SMALL,” you cannot set the surround speakers to “LARGE.”

SMALL

If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the surround channel bass frequencies from the sub woofer or other “LARGE” speakers.

NO

If you have not connected surround speakers, select “NO.”

xSURR BACK SP (Surround back speakers)

When the surround speakers are set to “NO,” the surround back speakers are also automatically set to “NO” and the setting cannot be changed.

DUAL

If you connect two surround back speakers, select “DUAL.” The sound will be output to a maximum of 7.1 channels.

continued

Started Getting

49GB