•SINGLE
If you connect only one surround back speaker, select “SINGLE.” The sound will be output to a maximum of 6.1 channels.
•NO
If you have not connected surround back speakers, select “NO.”
•2ND ZONE
If you use the surround back speaker in the 2nd zone, select “2ND ZONE.” When you select “2ND ZONE,” the input to the SURR BACK jacks of the MULTI CHANNEL INPUT is invalid (page 28).
Tip
The “LARGE” and “SMALL” settings for each speaker determine whether or not the internal sound processor will cut the bass signal from that channel. When the bass is cut from a channel, the bass redirection circuitry sends the corresponding bass frequencies to the sub woofer or other “LARGE” speakers.
However, it is best not to cut them, if possible. Therefore, even when using small speakers, you can set them to “LARGE” if you want to output the bass frequencies from that speaker. On the other hand, if you are using a large speaker, but prefer not to have bass frequencies output from that speaker, set it to “SMALL.”
If the overall sound level is lower than you prefer, set all speakers to “LARGE.” If there is not enough bass, you can use the equalizer to boost the bass levels. For details on how to adjust the equalizer, see page 104.
xFRONT xx meter (Front speaker distance)
Initial setting: 3.0 meter (10 feet)
Lets you set the distance from your listening position to the front speakers (A). You can adjust this distance from 1.0 meter to 7.0 meters (3 to 23 feet) in 0.1 meter (1 foot) steps. If both front speakers are not placed an equal distance from your listening position, set the distance to the closest speaker.
With only one surround back speaker
With two surround back speakers (The angle B should be the same)
xCENTER xx meter (Center speaker distance)
Initial setting: 3.0 meter (10 feet)
Lets you set the distance from your listening position to the center speaker. You can adjust this distance from 1.0 meter to 7.0 meters (3 to 23 feet) in 0.1 meter (1 foot) steps.
xSURROUND xx meter (Surround speaker distance)
Initial setting: 3.0 meter (10 feet)
Lets you set the distance from your listening position to the surround speakers. You can adjust this distance from 1.0 meter to 7.0 meters (3 to 23 feet) in 0.1 meter (1 foot) steps. If both surround speakers are not placed an equal distance from your listening position, set the distance to the closest speaker.
50GB