Press MEMORY/ENTER.
“MEMORY” appears on the display for a few seconds. Perform steps 5 and 6 before the display goes out.
4
Switch the FM reception mode, if necessary (page 76).
Tune in the station that you want to preset using Automatic Tuning (page 76) or Direct Tuning (page 76).
Press FM/AM to select “FM” or “AM.”
1 Turn INPUT SELECTOR to select tuner.
2
3
5
1
2 4,6
Presetting radio stations
You can preset up to 30 FM or AM stations. Then you can easily tune in the stations you often listen to.
Presetting radio stations

2 Hold down MEMORY/ENTER

and press ?/1 to turn the receiver back on.

“Autobetical select” appears on the display and the receiver scans and stores all the FM and FM RDS stations in the broadcast area.

For RDS stations, the tuner first checks for stations broadcasting the same program, then stores only the ones with the clearest signal. The selected RDS stations are sorted alphabetically by their Program Service name, then assigned a 2- character preset code. For more details on RDS, see page 80.

Regular FM stations are assigned 2- character preset codes and stored after the RDS stations.

When this process is finished, “Autobetical finished” appears on the display momentarily and the receiver returns to normal operation.

Notes

•Do not press any button on the receiver or supplied remote during autobetical operation, except ?/1.

•If you move to another area, repeat this procedure to store stations in your new area.

•For details on tuning the stored stations, see “Tuning to preset stations” on page 79.

•If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again.

78GB