5 Press PRESET TUNING + or PRESET TUNING – to select a preset number.

If you want to switch the memory page, press SHIFT on the remote.

If “MEMORY” goes out before you select the preset number, start again from step 4.

6 Press MEMORY/ENTER again.

The station is stored as the selected preset number.

If “MEMORY” goes out before you press MEMORY/ENTER, start again from step 4.

7 Repeat steps 2 to 6 to preset another station.

Tuning to preset stations

1

2

1 Turn INPUT SELECTOR to select tuner.

2 Press PRESET TUNING +/– repeatedly to select the preset station you want.

Each time you press the button, you can select a preset station as follows:

tA1yA2y...yA0yB1yB2y...yB0T

tC0y...yC2yC1T

Using the remote

Amplifier

 

1

Press INPUT SELECTOR, then move the

 

 

easy scroll key to select “TUNER” from the

 

2

input list.

Operation

Move the easy scroll key to select the preset

 

number you want, then press the key to enter the selection.

Naming preset stations

1

2

3

5,6

4

1 Press INPUT SELECTOR, then select “TUNER” from the input list.

You can also use INPUT SELECTOR on the receiver.

continued

79GB