5:Connecting the AC power cord

Connect the supplied AC power cord to the AC IN terminal on the receiver, then connect the AC power cord to a wall outlet.

AC power cord (supplied)

*

•Make sure that the total power consumption of the component(s) connected to the receiver’s AC OUTLET(s) does not exceed the wattage stated on the rear panel. Do not connect high-wattage electrical home appliances such as electric irons, fans, or TVs to this outlet. This may cause a malfunction.

Performing initial setup operations

Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults.

*A several space is left between the plug and the rear panel even when the power cord is inserted firmly. The cord is supposed be connected this way. This is not malfunction.

AC IN terminal AC OUTLET**

1,2

3

To the wall outlet

**The configuration, shape, and number of AC outlets will vary according to the area code of receiver’s you purchased.

Notes

•The AC OUTLET(s) on the rear of the receiver is a switched outlet, which supplies power to the connected component only while the receiver is turned on.

1 Press ?/1 to turn off the receiver.

2 Hold down ?/1 for 5 seconds.

“ENTER to Clear ALL” appears on the display for 10 seconds.

44GB