Star Micronics lC-10 user manual Colour Printing Commands, Character SET Commands

COLOUR PRINTING COMMANDS

Select printing colour

Mode ASCII

I.31

( ‘T’ “C” “)” “)” n

Both

<ESC> 7” n

	Decimal		Hexadecimal		I
40	40 67	41 41 n	28 28 43 29 29		n
27	114	n	1B 72	n

Select the printing colour according to the value of n. Ignored if a colour ribbon is not installed. The value of n may be either the character code or the digit character.

		n		Colour
< 0	>	or	“0”	Black
< 1	>	or	“1”	Red
< 2	>	or	“2”	Blue
< 3	>	or	“3”	Violet
< 4	>	or	“4”	Yellow
< 5	>	or	“5”	Orange
< 6	>	or	“6”	Green

CHARACTER SET COMMANDS

Select	standard		character	set
IModel	ASCII			1	Decimal		1	Hexadecimal
Std	<ESC>	‘2“	“0”	27	116	48	1B	74	30
	< ESC >	“t”	co>	27	116	0	IB	74	00

I

Selects the standard character set. This is the power-up default in Standard

mode if DIP switch l-7 is ON. The standard character set cannot be selected in IBM mode.

Select IBM character set

Mode	ASCII				Decimal			Hexadecimal
Std.	<ESC>	“t”	“I”	27	116	49	1B	74	31
	< ESC >	“1”	Cl>	27	116	1	1B	74	01

Selects an IBM character set (character set #2 unless an < ESC > “7”

command has been received). Ignored in IBM mode, since the IBM character set is selected automatically.

64