Star Micronics lC-10 Feed Paper, Set top of page at current position, Set page length to n lines

Feed

paper

n lines

Mode

ASCII

Decimal

Hexadecimal

Both

<ESC>

“f’

“1”

n

27

102

49

n

1B

66

31

n

<ESC>

“f

Cl>

n

27

102

1

n

1B

66

01

n

Feeds the paper

n lines

from

the current

line,

where

n is

between

0 and

127.

Set top of page at current position

Mode	ASCII		Decimal	Hexadecimal
IBM	1 <ESC>	“4”	I 21 52	IlB 34	I

Sets the current position as the top-of-page position. Note that this can also be done from the control panel.

Set page length to n lines

IModel	ASCII			I	Decimal		I	Hexadecimal		I
I				I			I
Both I	<ESC>	“C”	n	I 27	67	n	IlB	43	n

Sets the page length to n lines in the current line spacing, where n is between 1 and 127 in Standard mode or between 1 and 255 in IBM mode. Changing the line spacing later does not alter the physical page length. The current line becomes the top of the page.

Set page length to n inches

Mode	ASCII				Decimal	Hexadecimal
Both	<ESC>	-2”	CO>	n	27 61 0 n	1B 43 00 n

Sets the page length to n inches, where n is between 1 and 22 in Standard mode or between 1 and 127 in IBM mode. The current line becomes the top of the page.

Set top margin

Mode	ASCII			Decimal	Hexadecimal
Both	< ESC z	“c”	n	27 99 n	1B 63 n

Sets the top margin to (n - 1) lines, where n is between 1 and 255. Printing begins on the nth line on the page. The power-up default is n = 1, giving no top margin.