Star Micronics lC-10 user manual Execute ESC, Line feed

Execute < ESC >			“A”
Mode	ASCII		Decimal	Hexadecimal
IBM	<ESC>	“2”	21 50	IB 32

Sets the line spacing to the value defined by the last preceding < ESC >

“A” command. Sets the line spacing to l/6 inch if there is no preceding < ESC > “A” command.

Line feed

Mode

Both

ASCII				Decimal	Hexadecimal
<LF>				10	OA
Prints the	current line	and	feeds	the paper to the	next line. If DIP switch	I
l-2 is ON, also moves the next print position to the left margin. See the
preceding	commands	for	the line	spacing.

Reverse line		feed
Mode	ASCII		Decimal	Hexadecimal
Both 1	<ESC>	<LF>	127 10	IIB OA	I

Prints the current line and feeds the paper in the reverse direction to the preceding line. If DIP switch 1-2 is ON, also moves the next print position

to the left margin. See the preceding commands for the line spacing. Ignored when friction feed is used.

Perform one n/276-inch line feed

Mode

Both

ASCII			Decimal		Hexadecimal
< ESC >	“J”	n	21 74	n	1B4A	n

Feeds the paper once by n/216 inches, where n is between 1 and 255. Does not move the print position right or left when DIP switch l-2 is

OFF. Does not change the line-spacing setting. Ignored when friction feed is used.

Perform one n/276-inch reverse line feed

Mode	ASCII			Decimal	Hexadecimal
Both	< ESC >	“j"	n	27 106 n	lB6A	n

Feeds the paper once by n/216 inches in the reverse direction, where n is between 1 and 255. Does not move the print position right or left when DIP switch l-2 is OFF. Does not change the line-spacing setting. Ignored when friction feed is used.

72