Star Micronics lC-10 user manual Set line spacing to II8 inch, Set line spacing to 7172 inch

VERTICAL		POSITION	COMMANDS
Set line spacing to II8 inch
Mode	ASCII			Decimal		Hexadecimal
Both	<ESC>	“0”	21	48	1B	30
	Sets the distance the paper advances or reverses in subsequent line feeds
	to l/8	inch.
Set line spacing to 7172 inch
Mode	ASCII			Decimal		Hexadecimal
Both	<ESC>	“1”	27	49	IB	31

Sets the distance the paper advances or reverses in subsequent line feeds to T/i’2 inch.

Set line spacing to 716 inch

Mode	ASCII			Decimal	Hexadecimal
Std.	<ESC>	“2”	27	50	IB 32
	Sets the distance		the paper advances	or reverses in subsequent		line feeds
	to l/6	inch.

Set line spacing to n/216 inch

Mode	ASCII			Decimal	Hexadecimal
Both	<ESC>	“ 3”	n	21 51 n	1B 33 n

Sets the distance the paper advances or reverses in subsequent line feeds to 4216 inch, where n is between 0 and 255. If n = 0, in Standard mode the line-feed distance is set to 0, but in IBM mode this command is ignored.

Set line spacing to n/72 inch

Mode	ASCII			Decimal		Hexadecimal
Both	<ESC>	“A”	n	27 65	n	IB 41	n

In Standard mode, sets the distance the paper advances or reverses in

subsequent line feeds to n/72 inch, where n is between 0 and 85. If n =O, the line spacing is set to 0.

In IBM mode this command does the same except that (1) the new line

spacing does not take effect until the next < ESC > “2” command, and

(2) if n = 0, the < ESC > “A” command is ignored.