Select IBM character set #7 Mode ASCII Decimal Hexadecimal
Both <ESC> “7” 27 55 IB 37
Selects IBM character set #I. If the standard character set is currently
selected, this command remains dormant and takes effect at the next
< ESC > “t” I command. In IBM mode, character set #l is the power-up
default if DIP switch I-7 is OFF.
Select IBM character set #2 Mode ASCII Decimal Hexadecimal
Both <ESC> “6” 27 54 IB 36
Selects IBM character set #2. If the standard character set is currently
selected, this command remains dormant and takes effect at the next
< ESC > “t” I command. In IBM mode, character set #2 is the power-up
default if DIP switch I-7 is ON.
Select international character set Mode ASCII Decimal Hexadecimal
Std. <ESC> “R” n 27 82 n IB 52 n
IBM <FS> “R” n 28 82 n 1C 52 n
Selects an international character set according to the value of n.
n Character set n Character set
0 U.S.A 7 Spain I
1 France 8 Japan
2 Germany 9 Norway
3 England 10 Denmark II
4 Denmark I 1 I Spain II
5 Sweden I2 Latin America
6 Italy 13 Denmark/Norway
The tirst eight of these character sets (from U.S.A. to Spain I) can be
selected as power-up defaults by DIP switches 2-2 to 2-4.
Enable printing of a// character codes Mode ASCII Decimal Hexadecimal
IBM <ESC> I”’ nl n2
\ 27 92 nl n2 1B 5C nl n2
Enables printing of all characters in the IBM character set, including those
assigned to character codes which are normally considered control codes.
This command remains in effect for the next nl + n2 x 256 characters,
where nl and n2 are numbers between 0 and 255.
During this interval no control functions are executed. If a code with
no assigned character is received, the printer prints a space.
65