Star Micronics NX-2415II user manual Select graphics mode, nl, n2, ml, m2, HO Graphicsmode

Select graphics mode

Mode ASCII			Decimal		Hexadecimal
<ESC> “*”	no	n]	27 42 }0	nl	IB 2A no n]
Std.		ml m2	n2 ml	m2 .	n2 ml m2
n2

Selects one of eleven graphics modes depending on the value of nO and prints bit-image graphics in this mode. See <ESC> “K” (for 8- bit graphics) or <FS> “Z” (for 24-bit graphics) for information on

nl, n2, ml, m2, ...

HO Graphicsmode

o8-bit Normal-density

1 8-bit Double-density

2 8-bit Double-density, double-speed

3 8-bit Quadruple-density

4 8-bit CRT graphics, mode I

6 8-bit CRT graphics, mode II

32 24-bit Normal-density

33 24-bit Double-density

38 24-bit CRT graphics

39 24-bit Triple-density

40 24-bit Hex-density

(60 dots per inch) ( 120 dots per inch) (120 dots per inch) (240 dots per inch) ( 80 dots per inch) (90 dots per inch) (60 dots per inch) (120 dots per inch) (90 dots per inch) (180 dots per inch) (360 dots per inch)

Select graphics mode

Mode ASCII			Decimal	Hexadecimal
IBM	<ESC> “[” “g” nl	n2	27 91 103 nln2	IB 5B 67 n/	n2
	m(l ml	m2	mOml m2	mOml	m2

Selects one of eight graphics modes depending on the value of mO and prints bit-image graphics in this mode. The graphics image is (n]

+n2 x 256) – 1 dots wide. See <ESC> “K” (for 8-bit graphics) or <FS> “Z” (for 24-bit graphics) for information on ml, m2, ...

mO Graphics mode

o8-bitNormal-density

1 8-bit Double-density

28-bit Double-density, double-speed

38-bit Quadruple-density

824-bit Normal-density

924-bit Double-density

11 24-bit Triple-density

12 24-bit Hex-density

(60 dots per inch) ( 120 dots per inch) (120 dots per inch) (240 dots per inch) (60 dots per inch) (120 dots per inch) ( 180 dots per inch) (360 dots per inch)

92