Star Micronics NX-2415II Set vertical tab stops in channel, Select vertical tab channel

Set vertical tab stops in channel

Mode ASCII				Decimal		Hexadecimal
Sfd.	<ESC> “b”	no	)11	27 98 ti)	n]	1B 62 no III	00
		n2	.. <o>	n2	0	/72

Cancels all current vertical tab stops in channel nO, (where nO is between 0 and 7) and sets new vertical tab stops in this channel. (A channel is a set of vertical tab stops selected by the <ESC> “/” command.) See <ESC> “B” for parameters nl, n2, ... <0>.

Select vertical tab channel

Mode	Ascll	Decimal	Hexadecimal
Std.	<ESC> “/” nO	27 47 n(l	IB 2F no

Selects a set of vertical tab stops designated by a channel number (nO)from Oto 7. The tab stops in each channel are set by <ESC> “b”.

Vertical tab

Mode	ASCII	Decimal	Hexadecimal
Both	<VT>	11	OB

Feeds the paper to the next vertical tab stop and moves the print position to the left margin. Performs a line feed if no vertical tabs are set, as at power-up. Feeds to the top of the next page if vertical tabs are set but the current line is at or below the last vertical tab stop.