Star Micronics NX-2415II user manual Paper parking

Figure 3-9.Close the rear cover, then set the paper guide horizontally

Paper parking

After loading fanfold paper from the rear of the printer, you do not have to unload it when you want to print on a single sheet. The printer will “park” it for you if you follow the procedure below.

1.To begin paper parking, start with power ON, fanfold paper loaded in printing position, and the release lever forward.

2.Press the (ON LINE) button on the control panel to set the printer off- line. The ON LINE indicator will turn off.

3.Tear off the printed form at the last perforation, leaving not more than

about half a page showing above the top cover. If necessary, press the @APERFEED button to feed paper forward until a perforation is located just above the front cover, and tear there.

4. Press the (SET/EJECT button on the control panel.

The printer will automatically feed the fanfold form backward until the paper is completely free of the platen.

5.Move the release lever to the back.

6.Mount the paper guide in the upright position.

25