Star Micronics NX-2415II user manual Line feed, Reverse line feed, Select forwardfeed mode

Line feed

Mode	ASCII	Decimal	Hexadecimal
Both	<LF>	10	OA

Prints the current line and feeds the paper to the next line. See the preceding commands for the line spacing.

Reverse line feed

Mode	ASCII		Decimal		Hexadecimal
Std. I	<ESC>	<LF>	I 27	10	I IB	OA	I
IBM I	<ESC>	“]”	27	93	IB	5D

Prints the current line and feeds the paper in the reverse direction to the preceding line. Ignored when the Pull tractor unit is used.

See the preceding commands for the line spacing.

Select forwardfeed mode

Mode	ASCII	Decimal	Hexadecimal
Std.	<FS> “F”	28 70	IC 46

Cancels the reverse feed mode and selects forward feed mode. This is the default setting at power-on.

Select reverse feed mode

Mode	Ascll	Decimal	Hexadecimal
Std.	<FS> “R”	28 82	IC 52

Selects reverse feed mode. Reverses the direction of all vertical movements. Ignored when the Automatic Sheet Feeder is used.

Perform one time line feed

Mode

Both

ASCII	Decimal	Hexadecimal
<ESC> “J” n	27 74 n	IB 4A n

Feeds the paper once by n times the defined base unit (n/l 80 inches for the Standard mode). The value of n is between Oand 255. If n = O,the line-feed distance is set to O.Does not move the print position right or left. Does not change the line-spacing setting.

82