Star Micronics NX-2415II user manual

●Left margin moves to the right during printing

Probable Cause

The print head is not moving correctly.

Action

Check that the ribbon and paper are cor- rectly installed. See “Installing ribbon car- tridge” in Chapter2 and “Loading paper” in Chapter 3.

Problem with the application Refer to your application program manual.
program.
r	Reset the adjustment lever. See “Adjusting
The adjustment lever is in the
wrong position.	the printing gap” in Chapter 3.

●Printer is printing beyond side edge of forms

Probable Cause Action

Paper is adjusted incorrectly. Adjust both paper guides and the paper.

Problem with the application Refer to your application program manual. program.

A print head jam caused by the ribbon or a paper jam.

Make sure that the ribbon cartridge is cor- rectly installed. See “Installing the ribbon cartridge” in Chapter 2.

Clear the paper jam.

●Printer case is hot to the touch

Probable Cause Action

Printer’s vents are blocked. Move object away from the air vents, in- cluding the bottom of the printer.

● Printer is noisy
Probable Cause	Action
The printer vibrates.	Move any objects that touch the printer.
	Ensure that the printer is on a level, sturdy
	surface.
Printer covers are open.	Close covers.