Star Micronics NX-2415II user manual Default Settings-Eds Mode, How To Set The Eds Mode

9

chapter5

DEFAULT SETTINGS-EDS MODE

From the control panel you can change the parameters that define how your printer works. These parameters become your power-on settings. This function is called the Electronic DIP Switch (EDS) mode.

HOW TO SET THE EDS MODE

The EDS mode in this printer has 16functions that you can set as the power- on default settings.

Turn the printer on while simultaneously holding down the (SET/EJECT)j (PAPER FEED), and (ON LINE) buttons. You will hear an acknowledging beep as power comes on. This indicates that you have entered the EDS mode.

In EDS mode, the buttons on the control panel are used as shown below in Figure 5-1.

r-

			,	&	A
	t		II	Print	Change Setting
	Select Bank		Select Switch Exit
L
Figure 5-f.Button functions in the EDS mode
●	Use the(m)	button to select the Bank Letter.
●	Use the (-)	button to select the Switch Number.

●The ON LINE indicator shows the current setting, ON or OFF. Use the (ON LINE) button to change the settings.

●Press the (PAPER FEEobutton to print the current settings.

●Press the (SET/EJECT) button to save and exit the EDS mode.

41