Star Micronics NX-2415II user manual Serial Interface Cartridge

SERIAL INTERFACE CARTRIDGE

To run the printer in serial mode, you should use the optional Serial Interface Cartridge, IS-8XL.

The procedure for installing the interface cartridge is:

1.Set the DIP switches on the IS-8XL before attaching it to the printer. (See next page for detailed information.)

2.Turn off the power switch and disconnect the power cord from the power source.

3.Disconnect the interface cable if attached.

4.Slide out the parallel interface cartridge by gripping the flips on both sides.

5.Insert the Serial interface cartridge all the way, as shown in Figure 7-16.

.,

I

Figure 7-17.Replace the interface cartridge.

6.Connect the Serial interface cable both to the printer and to your computer.

63