Star Micronics NX-2415II user manual Setting Up, Installing the platen knob

SETTING UP

Place the printer in the desired location, and remove all packing material from the printer. This packing material is intended to prevent damage to the printer while in transit.

You will want to keep all the packing material, along with the printer carton, in case you have to move the printer to a new location.

Installing the platen knob

The platen knob is packed into a recess of the packing material which held your printer inside the printer carton. Be careful to remove the knob before disposing of the package.

Mount the knob on the platen shaft, which is located on the right-hand side of the printer. Rotate the knob on the shaft before pushing the knob fully into position.

Figure 2-2. Installing the platen knob

9