Star Micronics NX-2415II user manual Enable printing of all character codes

Enable printing of all character codes

Model	ASCII				I Decimal				I Hexadecimal I
Std.	<FS>	“\”	Ill	n2	23	92	III	112	Ic	5C	1?/ rd
I13M	<ESC>	‘Y”	Ill	112	27	92	n]	)12	IB	5C	n/ n2

Enables printing of all characters in the IBM character set, including those assigned to character codes which are normally considered control codes. This command remains in effect for the next nl + rz2x 256 characters, where nl and rz2are numbers between Oand 255. During this interval no control functions are executed. If a code with no assigned character is received, the printer prints a space,

Enable printing of all character codes on next character

Mode	ASCII	,’ ~ ,.		Decimal			Hexadecimal
Std.	<FS>		n	28	94	n	IC	5E	n
IBM -	<ESC>	‘cA“	n	27	94	n	IB	5E	n

This command operates like <ESC> ‘1” except that it remains in effect for only one character.