Star Micronics NX-2415II user manual Save Macro Definition

I

Save Macro Definition

You can save the current settings to the printer for later use by the following procedure:

1.Press the (ON LINE) button to set the printer off-line.

2.Press the(_T) button and hold it down.

3. While holding the-	button down, press the (-)	button and
hold them down until you hear a beep tone.

4.Release both buttons at the same time after this beep tone to save the current setting.

If you release these buttons after three beep tones, the macro has been cleared.

NOTE: You can store the following settings by this procedure.

. Current Font

●Current Pitch

●Current auto-loading amount for cut forms

●Current auto-loading amount for fanfold forms

●Current auto-loading amount in ASF mode

34