Star Micronics NX-2415II Loading paper, 8. Fan the paper before inserting it into the ASF

Loading paper

1.If fanfold paper has already been loaded into the printer, park the paper through the rear slot.

7 Push the printer release lever toward the rear of the printer ( ~ ) to load -.

single sheets.

3.Pull the paper loading lever toward the front of the printer to draw the hopper out until it is in position.

4.Adjust the left paper guide to the desired left position by moving it horizontally in either direction.

Figure 7-7.Adjust the paper guides to accornrnmlatethewidthof the PaPer

5:Fan the paper stack and square it off properly before inserting it into the Automatic Sheet Feeder.

Figure 7-8.Fan the paper before inserting it into the ASF.

57