Star Micronics NX-2415II user manual Switches C-4 and C-5 Print Pitch, Switch D-1 Print Mode

I

Switches C-4and C-5: Print Pitch

These switches select the default print pitch as shown below.

	I
I 17 CPI	OFF ] OFF]

NOTE: If you change these switches after you have saved a macro, these new settings will override the macro setting.

Switch D-1: Print Mode

This switch selects either Letter Quality (LQ) or Draft for the power- on setting.

When the LQ mode is selected, the LQ Font selection by the EDS switches E-1 to E-3 takes effect.

Switch D-2:Character Table

The action of this switch depends on the mode chosen with switchA-1.

Move this switch OFF to select Italic character table with the Standard/ Epson emulation mode. If you leave this switch in the ON position, in place of italics you will get the graphic characters, international characters, and mathematical symbols of IBM character set #2.

In the IBM emulation mode, ON selects character set #2, which has international characters and fewer control words. OFF selectscharacter set #l, for computers with a 7-bit interface.

45