Star Micronics NX-2415II user manual Set bottom margin, Cancel bottom margin, Form feed

Set bottom margin

Mode	ASCII	Decimal	Hexadecimal
Both	<ESC> “N” )7	27 78 n	1B 4E 17

Sets the bottom margin ton lines, where n is between 1 and 127 in Standard mode or between 1 and 255 in IBM mode. The bottom margin is reset when you change the page length.

Cancel bottom margin

Mode	ASCII	Decimal	Hexadecimal
Both	<ESC> “0”	27 79	IB 4F

Cancels the bottom margin.

Form feed

I Model	ASCII	I Decimal	] Hexadecimal I
Both	<FF>	12	Oc

Feeds the paper to the top of the next page according to the current page length, and moves the print position to the left margin. When friction feed is used, this command ejects the current page.

Set vertical tab stops

Mode]	ASCII	Decimal	Hexadecimal
I Both I	<ESC> “B” ,,/ rz2 .... <0>	I 2766 nl rz2 .0	I IB 42 nl t72 .00 I

Cancels all current vertical tab stops and sets new vertical tab stops at lines nl, n2, etc., where nl, n2, etc. are numbers between 1 and

255.The maximum number of vertical tab stops allowed is 16 in Standard mode and 64 in IBM mode. The tab stops must be specified in ascending order; any violation of ascending order terminates the tab stop list. Standard termination is by the <0> control code. The vertical tab stops are set in terms of the current line spacing and do not move if the line spacing is changed later.

84