State Industries SUF-60-120 Blocked Exhaust, Restore Factory Defaults, Change, Fault History

Current Fault

Description/Action		Display
Select Current Fault from the Main Menu and press the
Operational Button under "SELECT" to enter this menu. This
menu contains non adjustable operational information. Use the		Blocked Exhaust
Up & Down Buttons to navigate the menu.
This menu contains the current Fault or Alert error message.		Fault occurred 2 mins ago
	The exhaust is blocked or
The time the Fault or Alert message occurred appears directly
	restricted. Ensure
below. A brief description of what causes the particular Fault or
	condensate hose is draining.
Alert condition appears below that. Pressing the Operational
Button under "ADVANCED" will give more detailed service	Call a service professional:
information and a list of possible causes for the Fault or Alert
	Your Company Name Here
condition. See Fault And Alert Messages on page 62 for more
	(press [DOWN] for more....)
detailed information and diagnostic procedures.
	CHANGE	BACK	ADVANCED
If there is no Fault or Alert condition active this menu will not
contain any information, "(none)" will be shown next to Current
Fault in the Main menu.
Fault History

Description/Action		Display
Select Fault History from the Main Menu and press the		Fault History
Operational Button under "SELECT" to enter this menu. This
	1:	Blocked Air Intake (A7)
menu contains non adjustable operational information. Use the
Up & Down Buttons to navigate the menu.			51 mins ago
This menu contains a list of the last nine (9) Fault and Alert	2:	Blocked Exhaust (A8)
messages with a time stamp. The newest event will replace the			54 mins ago
oldest.	3:	Low Gas Pressure (A6)
Press the Operational Button under "VIEW" to view details for			57 mins ago
each Fault or Alert message stored.	4:	Blower Prover Failure (AC)
	VIEW	BACK	HELP
Fault Occurrence
Description/Action		Display
Select Fault Occurrence from the Main Menu and press the	Fault Occurrence
Operational Button under "SELECT" to enter this menu. This
	Ignition Failure		10
menu contains non adjustable operational information. Use the
Up & Down Buttons to navigate the menu.	ECO		0
This menu contains a running total of how many times each	Low Gas Pressure		10
Fault condition has occurred since the water heater was first	Blocked Intake Air		0
installed.	Blocked Exhaust		0
Note: Historical data is stored in the CCB's memory. If this	Thermostat Input 4		0
CCB is replaced during servicing the historical data on the CCB	Blower Prover		3
being replaced will be lost. The data stored in the new circuit		BACK	HELP
board will no longer reflect the entire history of the water heater.
Restore Factory Defaults
Description/Action		Display

Select Restore Factory Defaults from the Main Menu and press	Restore Factory Defaults
the Operational Button under "SELECT" to enter this menu.
To restore the adjustable user settings to their factory default		Are you sure you want to
settings press the Operational Button underneath “YES.” The
display will show text confirming the factory default settings		restore the system to factory
have been restored.		defaults?
Press the Operational Button underneath “BACK” to exit the
Restore Factory Defaults menu.
	YES	NO

50