Sterling Plumbing 882.00254.00 specifications Reviewing and Adjusting Basic Station Settings

Reviewing and Adjusting Basic Station Settings

Reaching and Reading the Station Operator Screens

The 7/50D Plus or 7/50D Controller has a Station Operator screen for each station, as shown below. This screen enables you to review and adjust all basic settings for the station.

To reach the Station n Operator screen:

1.Go to the Station Summary screen, if needed.

To reach this screen from any other screen, touch Stations on the right-hand side of the screen.

2.Touch and hold the icon for the station, until the controller either prompts for the password or displays the Station n Operator screen.

Once you have entered the password (if needed), the Station n Operator screen appears:

Settings in the box labeled Convey, the red Priority Convey Activate button, and the menu controls on the right-hand side of the screen appear for all stations. The other options in this screen appear if and only if the station has these features enabled.

Buttons in light gray are settings that you can adjust at this screen. Boxes in dark gray are for display only. If a pump assignment or purge setting needs to be changed, this must be done at the Station n Setup screen.

7/50D Plus or 7/50D Controller Chapter 4: Operation 61