The following table explains the status represented by each color at the Pump Summary screen.
Color | Label | Description |
Gray outline | Offline | Pump is not enabled. The controller ignores any alarms. |
Yellow | Ready | Pump is off, waiting for demand from a station. |
Blue | Idle | Pump is on, waiting for demand from a station. If there is no |
|
| demand before the end of the auto shutdown delay, the pump |
|
| will turn off. |
Green | Loading | Pump is conveying material to a station. |
Blue, blinking | Blow Back | Pump’s air filter is being cleaned by blowing compressed air |
|
| backward through it. |
Red, blinking | Alarm | Pump is in alarm. |
Red outline, blinking | Critical | Pump is in critical alarm. The controller has disabled the pump |
|
| until the alarm is cleared. |
Additional information about each pump, including configuration settings and the number of hours the pump has been running, is available at the Pump n Setup screen. For details on configuration settings, see p. 78. For details on the hour meter, see p. 65.
7/50D Plus or 7/50D Controller | Chapter 4: Operation | 58 |
