Sterling Plumbing 882.00254.00 specifications Initial Startup

To change the duration of a password:

1.At the System Setup screen, touch Operator Password Duration or Setup Password Duration, as appropriate.

A keypad pops up, with an entry of 0.

2.Enter the number of minutes (range: 5–99). Use ← to erase any mistakes. Use ↵ to enter the value.

The keypad disappears and the new setting appears under Operator (or Setup)

Password Duration.

3-6 Initial Startup

Once you have finished all the setup described above, you are ready to start the system. To do so:

1.At any screen, touch Stations on the right-hand side of the screen. The Station Summary screen appears.

2.For each station that you want to use, briefly touch its icon.

The icon turns blue, indicating that the station is ready or yellow, indicating that the station needs material.

3.Touch Pumps.

The Pump Summary screen appears.

4.For each pump that you want to use, briefly touch its icon. The icon turns blue, indicating that the pump is ready.

5.Touch Push to Start System in the lower right-hand corner of the screen. The system starts. If any alarm messages appear on the top of the screen, see p. 71.

7/50D Plus or 7/50D Controller Chapter 3: Installation 53