Sterling Plumbing 882.00254.00 specifications Setting Up Stations, Setting Up a Single Station

Setting Up Stations

Before starting the system, you must define several settings for each station, such as which pump conveys material to it and whether the station has a slide gate. This section first discusses how to use the controller’s menu system to configure stations. The table on pp. 73– 77 discusses the individual choices.

Setting Up a Single Station

1.Go to the Station Summary screen if needed.

To reach this screen from any other screen, touch Stations on the right-hand side of the screen. The Station Summary screen appears:

2.Touch the icon for the station you want to set up, and hold it for several seconds. The Station n Operator screen for the selected station appears:

7/50D Plus or 7/50D Controller Chapter 3: Installation 43