The System Setup screen appears:
The current passwords are displayed under Operator Password and Setup Password. A value of 0000 means that no password is required.
2.Touch Operator Password or Setup Password, as appropriate. A keypad pops up, with an entry of 0.
3.Enter up to four digits. If you want to remove the password protection, simply leave the entry at 0. Use ← to erase any mistakes. Use ↵ to enter the value.
The keypad disappears and the new setting appears under Operator (or Setup) Password. In addition, if you have added a password, a new button appears on the screen, labeled Log Off Operator and/or …Setup, depending which passwords are now active.
Note: When entering a password, all four digits must be supplied. For example, if you enter a password of 2 here, you will need to enter 0002 when the controller prompts for the password.
If desired, you can also change the duration for which a password remains effective. During operation, the
Note: The password timer starts when the user logs on. It expires even if the user is actively using the screens when the chosen time is up. If the timer expires, the system goes to the Station Summary screen. Your password duration should be long enough to allow authorized users to complete their tasks but short enough to provide adequate protection against tampering.
7/50D Plus or 7/50D Controller | Chapter 3: Installation | 52 |
