Sterling Plumbing 882.00254.00 specifications 50D Plus or 7/50D Controller Configurable Settings

Name	Description	Options	Default
Material set to n	Number for the material line that should be	Ø –150	0 (= not
	connected to this station.		assigned)
(Material actual)	Display only. Number (address) for the material
	line that is actually connected to this station.	—	—
	This information is displayed for your reference
	in troubleshooting.
RPV Options
RPV (Remote	This option allows the system to use a remote	disabled,	disabled
Proportioning Valve)	proportioning valve to mix two different	enabled PLC,
	materials, typically virgin and regrind materials,	enabled local
	during a convey cycle. Touching RPV repeatedly
	at the Station n Setup screen steps through the
	three choices.
	Enable this option with PLC control if you will be
	adjusting the mix from the controller’s touch
	screen.
	Enable this option with local control if the station
	operator will be adjusting the mix using a timer
	box at the station.
RPV material B	Percentage of the additive material to be	Ø –99%	30%
	included in the mix. This setting applies only
	when RPV is enabled with PLC control. The
	system is set up so that, if there are any
	inaccuracies in the proportions, the mix will
	contain more Material A and less Material B
	than specified here.
Cycle time	Number of seconds for each cycle in depositing	5–999 sec.	10 sec.
	Material A and Material B during the convey
	time. This setting applies only when RPV is
	enabled with PLC control. Example: If you set
	convey time to 30 seconds, cycle time to 10
	seconds, and Material B to 30% (so Material A
	is 70%), the system will convey as follows:
	Material A for 7 seconds
	Material B for 3 seconds (end cycle 1)
	Material A for 7 seconds
	Material B for 3 seconds (end cycle 2)
	Material A for 7 seconds
	Material B for 3 seconds (end cycle 3)
	In a volume-fill station, a cycle will be truncated
	before completion if the station becomes full.
	The cycle time should divide evenly into the
	convey time.

7/50D Plus or 7/50D Controller Chapter 6: Configurable Settings 77