To copy the selected pump’s settings to a range of other pumps
1.Touch First Pump next to the green button labeled Copy To Range of Pumps button.
The keypad pops up.
2.Enter the number for the pump at the lower end of the range you are copying to. Use ← to erase any mistakes. Use ↵ to enter the value.
The keypad disappears and the Pump Copy screen shows the pump number you entered under First Pump.
3.Touch Last Pump next to the light grey button labeled First Pump. The keypad pops up.
4.Enter the number for the pump at the upper end of the range you are copying to. Use ← to erase any mistakes. Use ↵ to enter the value.
The keypad disappears and the Pump Copy screen shows the pump number you entered under Last Pump.
5.Touch the green Copy button labeled Copy To Range of Pumps. “Complete” briefly appears at the top of the screen.
6.As appropriate, either continue copying to other pumps, or touch Return to go back to the Pump n Setup screen.
To copy the current pump’s settings to all other pumps
1. Touch the green Copy To All Pumps button. “Complete” briefly appears at the top of the screen.
2. Touch Return to go back to the Pump n Setup screen.
7/50D Plus or 7/50D Controller | Chapter 3: Installation | 50 |
