Sunrise Global CE4000, Cable Explorer TDR Module user manual Time & Date

Chapter 2

Setup

21

TIME & DATE

The time and date on the CE4000 is set from the System Setup screen (Figure 2-3). The time and date are in the formats hh:mm:ss and mm, dd, yy. Simply use the next field (F1) or the Prev Field (F2) keys to highlight the parameter you would like to change and use the Up/Down arrow keys to increment through the choices. The clock in the CE4000 is set in a 24-hr time format. Press Save to activate your choice and save the parameters to memory.

SERIAL PORT SETTINGS

The serial port speed settings may be set by highlighting them, using the Next Field (F1) or the Prev Field (F2) keys and then choosing the desired value by pressing the Up/Down or Left/ Right arrow keys. Press Save to activate your choice and save the parameter to memory.

Available Serial port speeds (baud rates): 115,200 and 19,200 and 9600.

UNITS

The CE4000 may be set to US measurement units of feet (ft) or to meters (m).

PLOT FILL

The default mode is Disabled. In the default Disabled mode the incidence pulse and reflections are displayed as a simple line graph on the display. When Plot Fill is Enabled, the TDR trace will be filled in under the trace to enhance the viewability.

PLOT 1 COLOR

The color of the main TDR trace may be selected from the list of Magenta, Red, Cyan, Green, Blue, Black and Brown. The default is Magenta.

PLOT 2 COLOR

The color of a second trace, used when comparing traces, may be selected form the list of Magenta, Red, Cyan, Green, Blue, Black and Brown. The default is Blue.