Chapter 1
General Information
Shipment Contents
The CE4000 TDR module comes with:
•
•CompactFlash memory card
•User manual
13
Charging Instructions
Charge the CM1000 before its first use for approximately 8 hours. To avoid damaging the internal battery, optimize its life and guarantee a full charge in
•Let the CM1000 cool to room temperature before recharging.
•Turn the CM1000 OFF before plugging in the charger.
•Leave the CM1000 OFF while recharging.
•Always leave the charger connected whenever the CE4000 is not in use.
Caution: Do not charge the CM1000 while above room temperature or with the unit turned ON. The internal battery can become hot, reducing its life and significantly increasing the time required to reach full charge.
Power Requirements
Operate the CM1000 from its internal battery, the supplied external AC adaptor or the optional 12 VDC adaptor. The supplied AC adaptor is a universal adaptor that converts 100- 240 VAC 50 Hz or 60 Hz to 18 VDC at 2.8A maximum. The AC adaptor can power the unit for normal use. However, fast charging will take place only when the unit is powered down before and during charging.
CAUTION: Do not attempt to use any other charger or apply DC voltage in excess of 18 VDC.
