Sunrise Global CE4000 user manual Getting Started, Setup, Power Up To Self Test Screen

Chapter 2

Setup

17

Chapter 2 Setup

GETTING STARTED

Power Up To Self Test Screen

Press the Power button. The green power LED will light as the unit boots up and performs its self-test. After about 10 seconds, each of the status LEDs in the upper left portion of the instrument will individually blink green and then red as the unit completes the test process. The screen will display the following information:

Performing Self Test:
Serial NVRAM	Pass
Loading FPGA	(Please wait)

You may not see the last reported “Pass” because the unit immediately goes to the Main menu (Figure 2-1) when the test is complete with all criteria passed.

Figure 2-1

BASIC SCREEN LAYOUT

The basic screen layout for the CE4000 remains consistent throughout the menus. The center of the screen always displays the current command icons and test information.