X9SPV Motherboard Series User’s Manual
a USB CD/DVD ROM/RW device can be used for this purpose. However, a USB Hard Disk drive cannot be used for BIOS recovery at this time.
To perform UEFI BIOS recovery using a
1.Using a different machine, copy the "Super.ROM" binary image file into the disc Root "\" Directory of a USB device or a writeable CD/DVD.
Note: If you cannot locate the "Super.ROM" file in your driver disk, visit our website at www.supermicro.com to download the BIOS image into a USB flash device and rename it to "Super ROM" for BIOS recovery use.
2.Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB drive and power on the system
3.While powering on the system, keep pressing <Ctrl> and <Home> simultane- ously on your PS2 keyboard until your hear two short beeps. This may take from a few seconds to one minute.
4.After locating the new BIOS binary image, the system will enter the BIOS Recovery menu as shown below.
Note: At this point, you may decide if you want to start with BIOS Recov- ery. If you decide to proceed with BIOS Recovery, follow the procedures below.
